Please identify these deckel fp1 parts

April 5, 2015, 6:33 am

≫ Next: Transporting A Maho

≪ Previous: Chasing acollet for an early Thiel 158

$

0

0

Hi All,
I recently bought a Deckel FP1 here in Norway and bought the manuals in English from tony at lathes.co.uk. However I`m puzzled by the differences in the photographs in the manuals and the accessories on my machine. could you please help clear this up for me.
The first pair of photos show my dividing head, on the manual photo this head is mounted directly to the x axis but mine has two articulating brackets attached to it to give the possibility of rotation of the head.
The second pair of photos show a table which has a system for rotating it but I can`t find the other part that it swivels on. Does anyone know what this is for?
There is a rotary table without a dividing capability just to be used manually together with the scale around the base.
There are more puzzling things that I will attach to my next post.
Alan
[ATTACH=CONFIG]135827

Attached Thumbnails

         

---

Transporting A Maho

April 7, 2015, 5:20 pm

≫ Next: Nice Oerlikon UB2 on Ebay

≪ Previous: Please identify these deckel fp1 parts

$

0

0

So I just snagged a mh500w and will need to pick it up in a couple weeks. Since I havnt dealt with one of these machines before I was just wondering if there was anything that needed special attention when transporting one of these machines. Im sure they are quite top heavy, and I have lots of good heavy cargo straps to tie it down, and plenty of stretch wrap to keep the dirt and moisture out during transport. I just dont want to get the thing home and find it damaged because I didnt lock something out, or stow it a certain way.

Jim

Nice Oerlikon UB2 on Ebay

April 8, 2015, 3:42 am

≫ Next: Maho MH700 Lubrication Recommendations

≪ Previous: Transporting A Maho

$

0

0

Radialbohrmaschine Oerlikon UB2 Schwenktisch Deckel FP3 Teilapparat Rundtisch in in Bad Waldsee | eBay

Some might enjoy seeing this.
Very tempting!
But it takes up quite a bit of space and can't really do anything special that a mill can't do (as long as one is not into ship building or a lot of upside-down drilling).
So I'll pass. But high eye-candy value in any shop!

martin

Maho MH700 Lubrication Recommendations

April 8, 2015, 4:38 am

≫ Next: Just a heads up about the FP1 dial type on eBay

≪ Previous: Nice Oerlikon UB2 on Ebay

$

0

0

After having my Maho MH700 in storage for a year since I bought it, I have finally moved it to a location that I can power it up and use it.

My Maho MH700 is a manual machine with the "square" head. I am guessing that it was manufactured in 1970, going by the serial number (70358)???

As my machine did not come with a manual I am not sure what oils I should be using in the main gear box as well as the "one shot" lubrication system. I am getting some Shell Tonna 68 for my DSG 1307 so I was planning to use that in the "one shot" lubrication system.

Does anyone know what the original recommended lubricants were?

Cheers

Piers

Attached Thumbnails

 

Just a heads up about the FP1 dial type on eBay

April 8, 2015, 6:20 am

≫ Next: FP2 Y axis screw and nut - cost for new ?

≪ Previous: Maho MH700 Lubrication Recommendations

$

0

0

Looks pretty nice and is desirable dial type with no. 40 spindles....BUT....they shot a video for me months ago and it sounds horrible.

I think it was Ross that said it sounded like a cement mixer. I could probably find the video on Youtube if they haven't deleted it.

FP2 Y axis screw and nut - cost for new ?

April 8, 2015, 3:17 pm

≫ Next: electrical problems with maho mh 400 p

≪ Previous: Just a heads up about the FP1 dial type on eBay

$

0

0

First generation, if it matters....like from Singer....and the first Captain Obvious to suggest I email Singer gets a dope slap ;)

electrical problems with maho mh 400 p

April 9, 2015, 1:56 pm

≫ Next: Problems MAHO 600E recently purchased

≪ Previous: FP2 Y axis screw and nut - cost for new ?

$

0

0

I just got a Maho mh400 p with electrical problems.
The heidenhain is not working, I,m ok with that it´s a old TNC 122. I do not need the TNC think I just put on a ne DRO
But from the control panel I can not move any of the axis..
I do have the manual, and most of the drawings but there are some missing.
Its for a 1979 model
I am looking for the drawings


E3.5716
E3.5717
E3.5720
E3.5721
E3.5722
E9.5729

Who can help me out with a digital copy.

Thanks,

Remco

Problems MAHO 600E recently purchased

April 10, 2015, 9:41 am

≫ Next: Fascinating like a car wreck: FP2 modification

≪ Previous: electrical problems with maho mh 400 p

$

0

0

Is there someone that can help me, I just purchased a MAHO 600E approx. 1986,I can't get into the position to enter the machine constants. When I turn the knob on the board for unlocking the device nothing changes on the display. Any idea someone ?
I also am curious to know if anyone have Heard that it is important in what order the phases are connected ? I was told that it's vey important other wise the controller can be damaged
Björn

---

Fascinating like a car wreck: FP2 modification

April 13, 2015, 5:16 am

≫ Next: How much bigger is a manual FP2 than an FP1?

≪ Previous: Problems MAHO 600E recently purchased

$

0

0

Deckel FP 2 Fräsmaschine, Universalfräsmaschine, Bohrmaschine, Werkzeugfräsmasch in in Berglen | eBay

Oh the horror!

What happend here ? and why?

How much bigger is a manual FP2 than an FP1?

April 13, 2015, 2:35 pm

≫ Next: Machine gloat.....

≪ Previous: Fascinating like a car wreck: FP2 modification

$

0

0

I have searched and been unable to find dimensions and weight of an older manual FP2. How much bigger is it than a lever FP1?

Machine gloat.....

April 14, 2015, 8:47 am

≫ Next: Deckel GK21 missing parts

≪ Previous: How much bigger is a manual FP2 than an FP1?

$

0

0

I will be the proud owner of George Cobb's FP5NC on Friday the 24th! I understand that it takes CAT/ISO40 toolholders and it comes with a bunch of pull studs. Anyone know if the Deckel pullstuds are metric thread?

Deckel GK21 missing parts

April 16, 2015, 6:51 pm

≫ Next: Schaublin Type 53 - parts availability

≪ Previous: Machine gloat.....

$

0

0

I just took delivery of a gk21 and I don't know anything about these machines. It came with a bunch of collets but as far as I can tell only 3 of them fit the spindle.

I'm going to post some photos of what I have and I'm hoping someone can tell me what I'm missing and where i can get it, I've looked through the links in this forum and have struck out so far.

First up - Missing nut on spindle for tightening up the collet, I also believe I'm missing some wrench for holding the spindle.


Next - Stylus is the only name I can think to call this (I have an operators manual coming). It came with a small holder (2nd photo) and a bunch of collets that I don't think really belong with this machine but if all else fails I'll find a way to adapt it.



Spindle - It came with another spindle (low speed?) that does have a nut but none of the collets i have fit that spindle.


So that's where i am right now, if you have parts for sale or can point me to someone who does I would appreciate your help. I could probably deal with the collets I have if i had a nut for the spindle but it would also be nice to have a couple more (could use a 1/8" or collets that fit the other spindle)

Thanks

Attached Thumbnails

       

Schaublin Type 53 - parts availability

April 21, 2015, 3:57 am

≫ Next: Deckel contour 2 programming help

≪ Previous: Deckel GK21 missing parts

$

0

0

Hi,
I have recently acquired one of the above and although it's in pretty good condition there are a few points I'd like to address.

In addition I'm interested to know if anyone has ever seen the high speed head turn up.

Any clues as to where I may begin a search would be great.

Thanks

Deckel contour 2 programming help

April 21, 2015, 5:34 am

≫ Next: Need Help With German Word

≪ Previous: Schaublin Type 53 - parts availability

$

0

0

Hello,
I'm new to dialog programming and in try to write a simple circle roughing program. Using the book example with I describe the hole location and subroutine number then define the sub routine. In the first and only block the book also has the spindle speed which is also in the sub routine. However the only input the control will let meake is 0

Need Help With German Word

April 21, 2015, 7:50 am

≫ Next: FP3 Anyone??

≪ Previous: Deckel contour 2 programming help

$

0

0

What would the German word be for what well call in the states "Bib overalls"

I'm talking about the blue ones you see in the videos from places like Waldrich - Coberg.

Thanks!

Todd

---

FP3 Anyone??

April 23, 2015, 2:30 am

≫ Next: Leitz jig borer

≪ Previous: Need Help With German Word

$

0

0

https://www.surplex.com/en/m/7/decke...ne-202699.html

Just in case there is a itch that need scratching...

Leitz jig borer

April 24, 2015, 8:18 pm

≫ Next: Now here's one for you Deckel purists....

≪ Previous: FP3 Anyone??

$

0

0

I have a Leitz Jig Borer I purchased in a sale from a college lab. The machine came with almost no tooling.

The machine came with no manual.

I will try to post a few pictures. I am looking for advice on tooling. The only thing it came with was a small Jacobs chuck.

What type collets would it use? Someone has suggested F8?
The spindle nose is 15mm.

What is the fixture for above the drill chuck in the photos? The chuck is attached to an adapter. Maybe for a boring head? Which I do not have.

Any advice would be helpful.I am cross posting here because there is a lot of information about small precision machine here.

Attached Thumbnails

       

Now here's one for you Deckel purists....

April 25, 2015, 11:47 am

≫ Next: Fp4ma assembly problem

≪ Previous: Leitz jig borer

$

0

0

You can buy this beauty on ebay.

Fp4ma assembly problem

April 25, 2015, 12:33 pm

≫ Next: Deckel model 6017 Rotary Table 380 mm / Rundtisch

≪ Previous: Now here's one for you Deckel purists....

$

0

0

Hello we finally got our fp4ma up and running and but it couldn't figure out where this panel is supposed to go.

Deckel model 6017 Rotary Table 380 mm / Rundtisch

April 26, 2015, 12:02 am

≫ Next: Boring bars for lathe or mill?

≪ Previous: Fp4ma assembly problem

$

0

0

Dear Deckel enthusiasts,

Yesterday I was offered this Deckel model 6017 rotary table (380mm diameter) at a price that was too low to refuse. The top is in good shape, the corner of one slot is chipped, but nothing that matters is wrong.

The price was good because the seller pointed out that there were some missing parts. Could someone help me identify what is needed? It seems that the handle for the 24-point indexer is gone, there is also a rounded stub which might be a broken off handle, I'm not sure.





[Edit: yes, the rounded stub is just a broken off handle for fixing the "moving angular scale" into place.]

Cheers,
Bruce

Attached Thumbnails