Hello to everyone.
I have problem. My machine FP4MA with contour 2 today does not start up, when power on button is pressed.
6 months now machine works perfect, now have this problem.
On the bottom of screen it writes 00, (CNC schaltet wegen Unterspannung ab. Pufferspeicher in Ordnung).
I search forum here and read some posts about batteries. I open the control board, and SAFT 7,2 V batteries looks like have bad contact, and also voltmeter read is 0,0V ?
Hope that batteries could be change and nothing is lost. ( I read that parameters is written on EPROMS).
If anybody coud help or have some advice, please help me.
Many thanks
best regards
![Click image for larger version.
Name: 20170118_191608.jpg
Views: 19
Size: 98.5 KB
ID: 188890]()
![Click image for larger version.
Name: 20170118_191624.jpg
Views: 20
Size: 92.8 KB
ID: 188891]()
I have problem. My machine FP4MA with contour 2 today does not start up, when power on button is pressed.
6 months now machine works perfect, now have this problem.
On the bottom of screen it writes 00, (CNC schaltet wegen Unterspannung ab. Pufferspeicher in Ordnung).
I search forum here and read some posts about batteries. I open the control board, and SAFT 7,2 V batteries looks like have bad contact, and also voltmeter read is 0,0V ?
Hope that batteries could be change and nothing is lost. ( I read that parameters is written on EPROMS).
If anybody coud help or have some advice, please help me.
Many thanks
best regards
