G0 and G1 commands are not working

I have Deckel CNC Milling Machine. Model FP4AT Dialog 11 Control.
We are facing problem, that G0 and G1 commands are not working.

Machine is working well in manual mode means
Manually all axes are working fine.
Home function is also working fine.
Spindle is working well in automatic mode.

but when i give command G0 and G1 on any axis (X, Y, Z). Suppose if we give command
to X axis separately;

G0 X10,
or
G1 X30 F1000

then the machine travels in x-axis about 0.2 ~ 0.25mm (shows on display of dialog 11) ant then axis stopped and machine goes to hanged / command not finished. for next operation it needs to restart the hydraulic.

If i give command to any axis X, Y, Z.

G0 X0.2
or
G1 X0.2 F1000

It is EXECUTED well in all axes (x,y,z) and command is completed / finished.

Dear if you dont have information about Dialog 11 Control then please help me about general information, how to trouble shooting GO and G1 command.

Please also help me how to interface Grundig Dialog 11 PLC.

Thanking you