Dialog 11 on a Deckel FP50CC/T
I am breaking free of manually writing CAM and am having trouble. I have done a few CAM programs and wrote a few post processors, but am now branching into using an old version of Featurecam. I have been spending some time converting a Dialog 4 post processor to Dialog 11. It currently runs cycles, arrays of holes, and standard moving operations.
I am consistently having "Radius Deviation Too Large" when I test it on the Deckel. On other machines which had this error I forced the CAM to not do curves and do straight lines, but those cases I was using a modern computer to drip info and a different CAM program. I don't know how to force Featurecam to make straight lines.
Below is the g-code start. It is hung up on N120.
I am currently unsure of how to fix this. Most post relating to Featurecam link to HSM, which has a different post processor format (.cps vs .cnc). What do other people do to make CAM for their Dialog 11s?
I am breaking free of manually writing CAM and am having trouble. I have done a few CAM programs and wrote a few post processors, but am now branching into using an old version of Featurecam. I have been spending some time converting a Dialog 4 post processor to Dialog 11. It currently runs cycles, arrays of holes, and standard moving operations.
I am consistently having "Radius Deviation Too Large" when I test it on the Deckel. On other machines which had this error I forced the CAM to not do curves and do straight lines, but those cases I was using a modern computer to drip info and a different CAM program. I don't know how to force Featurecam to make straight lines.
Below is the g-code start. It is hung up on N120.
Code:
% 111*%
[ MADE IN FEATURECAM ]
N20 G17
N25 M6 T001
[ ROUGH1 POCKET POCKET1 ]
N35 G0 Z10
N40 G0 X0.2835 Y-1.0 F25 S+2482
N45 G0 Z1.0
N50 G0 Z-0.15
N55 G1 Z-0.24
N60 Y0. Z-0.3129
N65 Y-1.0 Z-0.3857
N70 Y0. Z-0.4586
N75 Y-1.0 Z-0.5314
N80 Y0. Z-0.6043
N85 Y-1.0 Z-0.6771
N90 Y0. Z-0.75
N95 G3 X0.2835 Y0. I-0.2835 J0. F50
N100 G2 X0.3325 Y0.308 I0.9931 J0.
N105 G3 X0.1912 Y0.5861 I-0.2097 J0.0684
N110 X0.4864 Y0.3788 I-0.1912 J-0.5861
N115 X0.0495 Y0.7843 I-1.4665 J-1.1421
N120 X-0.5465 Y0.7764 I-0.2923 J-0.4393
N125 X0.0708 Y0.9469 I0.5465 J-0.7764
N130 G2 X-0.3734 Y1.0522 I0.108 J1.4452
N135 G3 X-0.8246 Y0.9823 I-0.1679 J-0.4073
.....