Hi,
I have a Deckel FP4 cc/t which recently bought and installed.
There is some issue with the spindle. It can be started but will only run on a low RPM.
There is a whining noise when the spindle is running, hard to find wether it is from mechanical or electric components.
The mechanical Hi/Low speed gear seem to work as it should.
On below youtube links you can see /hear the machine running and might recognize the problem.
238D64A 57E 4489 B43D 4D1257B266 - YouTube
IMG 46 - YouTube
FADE24 77C5 489 A286 CE9E1DC9872 - YouTube
It could be something wrong with the spindle control card (BOSCH SPM 25 T/A) but as a new/refurbished one is quite expensive I thought it would be wise to check in with the experts here on the forum.
Thanks in advance for any help!
I have a Deckel FP4 cc/t which recently bought and installed.
There is some issue with the spindle. It can be started but will only run on a low RPM.
There is a whining noise when the spindle is running, hard to find wether it is from mechanical or electric components.
The mechanical Hi/Low speed gear seem to work as it should.
On below youtube links you can see /hear the machine running and might recognize the problem.
238D64A 57E 4489 B43D 4D1257B266 - YouTube
IMG 46 - YouTube
FADE24 77C5 489 A286 CE9E1DC9872 - YouTube
It could be something wrong with the spindle control card (BOSCH SPM 25 T/A) but as a new/refurbished one is quite expensive I thought it would be wise to check in with the experts here on the forum.
Thanks in advance for any help!