I was hoping to get some advice. I picked up an older S0E at an auction recently. I am going through the machine and found that the front cover for the filter housing is stuck.
From the parts manual it appears there is on an eccentric cam that actuates a pin to fix the cover in place. I tried rotating the knob/cover with channel locks and a leather strap to protect the knurling. It will not budge. I lightly apply torque as it appears there is only a small set screw that fixes the knob to eecentric cam.
Is there a way to access this cover from the rear of the machine? It seems my options are limited working from the front.
Thanks.
From the parts manual it appears there is on an eccentric cam that actuates a pin to fix the cover in place. I tried rotating the knob/cover with channel locks and a leather strap to protect the knurling. It will not budge. I lightly apply torque as it appears there is only a small set screw that fixes the knob to eecentric cam.
Is there a way to access this cover from the rear of the machine? It seems my options are limited working from the front.
Thanks.