Here are some images that show the process from 300# block of Durabar to 115# final machined part...
1.Original next to the raw 3" thick block
2.Up onto the FP4
3.Rough face one side and two holes
4.Up into the CNC
5.On the table
![Click image for larger version.
Name: 20201229_142946.jpg
Views: 36
Size: 97.0 KB
ID: 309568]()
![Click image for larger version.
Name: 20201229_150828.jpg
Views: 37
Size: 92.9 KB
ID: 309569]()
![Click image for larger version.
Name: 20201229_180004.jpg
Views: 43
Size: 95.9 KB
ID: 309570]()
![Click image for larger version.
Name: 20201230_112012.jpg
Views: 37
Size: 93.6 KB
ID: 309571]()
![Click image for larger version.
Name: 20201230_113810.jpg
Views: 40
Size: 89.8 KB
ID: 309572]()
1.Original next to the raw 3" thick block
2.Up onto the FP4
3.Rough face one side and two holes
4.Up into the CNC
5.On the table
