This morning when I turned on the machine, FP2NC with D2, the hydraulic tool ejection is not working for the vertical spindle. It is working fine on horizontal, but when vertical is tried, no sound comes from the pump, nothing, no error on the screen. The tool change light is flashing, but the knob to do the ejection is ignored. I can flip the knob to horizontal on the console, then the eject knob works. I have tried turning the machine on and off, starting and stopping the spindle, changing modes, no help. I used the machine two days ago, no problems. I searched the forum and could not find any related threads.
↧