My FP2NC vertical spindle tool change valve is not working correctly, so I would like to replace it. It actuates by hand (there is a button on top), but not electrically. I probably should remove it and see what the problem is, but I would prefer to have a replacement ready, since at least now the machine is running.
Is the part number in the orange book valid: 6096 04 009321 00, made by Hawe. The type is G3 or G24.
What is involved in removing the valve? Does everything have to come out (pump and all valves)?
Also, I should add, the electrical controls for the valve are the same for horizontal and vertical valves. Both valves are controlled with the same switches (K10 & K12). There are no errors on the console. The buttons work correctly, as verified in horizontal mode.
Is the part number in the orange book valid: 6096 04 009321 00, made by Hawe. The type is G3 or G24.
What is involved in removing the valve? Does everything have to come out (pump and all valves)?
Also, I should add, the electrical controls for the valve are the same for horizontal and vertical valves. Both valves are controlled with the same switches (K10 & K12). There are no errors on the console. The buttons work correctly, as verified in horizontal mode.