Its the same machine as in this earlier thread I am having troubles with
http://www.practicalmachinist.com/vb...ok-out-320577/
At high speed it is making a rumbling sound and we determened it is in the horizontal part of the sliding head
We startet to take it apart The first 2 gears came out without problems But we did not find anything wrong on them So we started to take out the long shaft with the long gear on it
The first couple od cm was no problem but then it stopped we looked and looked but could not find a reasson why it would not come out Attached some pictures of how far we are right now
I know I took apart a older machine some years ago But never a newer one
Anybody done this before
Peter
![Click image for larger version.
Name: DSC01032.jpg
Views: 38
Size: 86.2 KB
ID: 172873]()
![Click image for larger version.
Name: DSC01033.jpg
Views: 35
Size: 84.7 KB
ID: 172874]()
![Click image for larger version.
Name: DSC01034.jpg
Views: 36
Size: 79.6 KB
ID: 172875]()
![Click image for larger version.
Name: DSC01035.jpg
Views: 37
Size: 68.1 KB
ID: 172876]()
![Click image for larger version.
Name: drawing.jpg
Views: 35
Size: 72.7 KB
ID: 172877]()
http://www.practicalmachinist.com/vb...ok-out-320577/
At high speed it is making a rumbling sound and we determened it is in the horizontal part of the sliding head
We startet to take it apart The first 2 gears came out without problems But we did not find anything wrong on them So we started to take out the long shaft with the long gear on it
The first couple od cm was no problem but then it stopped we looked and looked but could not find a reasson why it would not come out Attached some pictures of how far we are right now
I know I took apart a older machine some years ago But never a newer one
Anybody done this before
Peter
